R.4. General YPARCHO Concepts: Construction and Maladjustment.
A review of the Yparcho concepts of construction and adjustment.
The construction of combination-machines pertains to the realm of mechanisms, combinations of mechanisms, and their gear trains or sequences of mechanism combinations.
The construction of the combination-machine begins during its « pre-A » phase—that is, the phase prior to the combination-machine’s introduction into the Host System.
It theoretically continues during the first part of the journey and concludes during the journey (AB)—meaning, the lifespan of the combination-machine.
Incomplete construction should not be equated with maladjustment, although this confusion is common: an incomplete construction does not imply a construction composed of maladjusted mechanisms.
The mechanisms exist and are complete upon the combination-machine’s introduction into the Host System, yet some are not yet activated.
Regarding the construction of combination-machines, one must therefore note the differences between:
– activation,
– non-activation, and
– reactivation
of the mechanisms that make up the combination-machine.
Construction is complete when all mechanisms are activated.
In a combination-machine, all mechanisms carried during the journey are useful and necessary; they must all be activated to function—that is, to produce the outputs expected by the Natural System.
However, there is a specific order to the activation of their operation, depending on situations encountered during the journey (AB); consequently, immediate activation is not systematically required the moment the combination-machine appears in the Host System. Adjusters must therefore exercise great discernment regarding the behavior of the human beings being adjusted, in order to determine whether the issue is a misalignment or a failure of the mechanism to activate.
Sometimes a mechanism ceases to function and requires reactivation; the Yparcho System refers to this as « reactivation. »
There are multiple causes for the cessation of mechanism function.
For this reason, deactivation—depending on its origins—often falls into the category of misalignments, even though it is not, in principle, a natural occurrence.
As for misalignments in the strict sense, they stem from disturbances (examined in previous articles) that lie outside the control of the Natural System.
The mechanisms are naturally activated and subsequently function perfectly in a natural way, yet the resulting effects are contrary to nature and unforeseen by the Natural System.
R.5. Specific YPARCHO concepts regarding constructions and maladjustments.
Constructions and adjustments/maladjustments:
Here are the key points for analyzing the failures of « Adjusters » when attempting to adjust human beings.
Diagrams showing the consequences of maladjustments in human trajectories on the Natural System: the Natural System becomes distorted and is compelled to react effectively to regain its initial shape, with the aim of successfully achieving its fusion.
Black phase, φ ~: distortion of the Natural System.
Green phase, φ –>: reaction of the Natural System to regain its initial shape.
Blue phase, φº: Natural System’s initial shape regained.
Tiªº: perfect human trajectory.
Tiªφ: imperfect human trajectory.
S¹U: Natural System.
X: expansion force or trajectory of the Natural System.
It should be noted that distortions of the Natural System always occur after distortions of human trajectories (latency).
There is a latency period for the return to the natural state, explained by the following sequence:
1- Following maladjustments, the human trajectory becomes imperfect —> 2- the Natural System increases its susceptibility to distortion: it becomes distorted —> 3- a reaction by the Natural System follows to regain its initial shape. This reaction impacts the human trajectory, compelling it to return to its initial shape.
Diagram No. 1 illustrates the unnatural situation where the Natural System—and consequently the human being—is subjected to the disturbances examined in previous articles.
Diagram No. 2 illustrates the natural or theoretical situation.
Apart from the primary cause—ignorance of how the Natural System operates—the second major reason for adjustment failures is the conflation by « Adjusters » of concepts such as construction, activation/deactivation/non-activation, and maladjustment—concepts introduced at the beginning of this article.
This conflation creates genuine confusion by lumping all these causes together into one, whereas they must be kept strictly separate so that each cause can be addressed with its own specific resolution method.
The situation can be summarized as follows:
Ignorance inevitably leads to a confusion of causes and, consequently, to failure in the adjustment process.
The reverse is also true: when it comes to adjusting « machine-combination » systems, failures stem from ignorance and confusion.
R.6. Specific Yparcho Concepts: Construction and Malfunction. Continued.
Through an understanding of the Yparcho system, the reasons for the existence and presence of human beings become crystal clear and indisputable.
Summary of operations to be performed by an Adjuster on a malfunctioning combination-machine.
This summary is based on articles published in the Yparcho System, from Book 1 to Book 8.
In the simplified diagram of the Model—which comprises two systems, System E¹ and System E², positioned in opposition to one another with the aim of merging—the human being is conceived and constructed by the Natural System (in this instance, System E¹). Its functions are:
– to absorb and buffer the effects of disturbances arising from the attempted fusion;
– to transform and transport the effects of these disturbances to the Natural System, so that they may be stored and utilized by the Natural System.
The effects of these disturbances are termed « FUTUR » (it is important to distinguish between Futur and Avenir).
The absorption of the FUTUR by the human being, followed by its transport to the Natural System, is termed « PRÉSENT » (PRESENT).
The storage of this information by the Natural System is termed « PASSÉ » (PAST).
The primary function of the human being is therefore to buffer the FUTUR and transform it into PRÉSENT, so that it may be stored by the Natural System as PASSÉ.
For these functions to be performed perfectly, human beings must meet three essential conditions:
1- that their construction be completed rapidly;
2- that their communication circuit with the Natural System function perfectly; 3- that the functioning of human beings be perfect—meaning that all their mechanisms are activated and regulated perfectly and continuously, even though they undergo constant distortions due to the disturbances encountered throughout their journey (AB).
The role of the Adjusters is therefore to ensure, continuously and unfailingly, the observance and proper execution of human functions.
Upon their integration into the Host System, human beings enter the unfolding of the History of the Model—a history, and the conditions of its unfolding, that began long before their own existence.
Votre commentaire